The SCALPNET 60 is used for cleaning road vehicles, degreasing, cleaning traffic lanes, eliminates the static film of vehicles. It is also used with a high pressure machine for cleaning and degreasing all surfaces.
The SCALPNET 60 is very effective at removing insects adhering to the car bodywork. In addition, it has a self-drying effect. The SCALPNET 60 gives plastics their original brilliance.
SCALPNET 60 is a phosphate-free super concentrated detergent, more than 90% biodegradable, soluble in water in any proportion. It must be 5-25% diluted with water before use.
To clean vehicles, use a 10% spray solution.For use with a high pressure machine, a concentration of 0.1% to 0.5% is recommended at the end of the lance.
Step 1
Diluted in water by 5% to 25%.
Step 2
For vehicle cleaning spray a 10% solution
Step 3
Leave on for 3 to 5 minutes.
Step 4
Then rinse with pressurized water.
Step 5
For use with a high pressure machine, a concentration of 0.1% to 0.5% is recommended at the end of the lance.
NST PRO 61 is a degreasing cleaner. It removes oil and grease from mechanical parts and metal surfaces (bearings and balls, precision mechanics, engine parts, steel mold ...). NST PRO 61 is formulated from oxygenated and chlorinated solvents.
NST 50 is a cleaner and degreaser, formulated with oxygenated solvents and hydrocarbons. This super degreaser for mechanical parts and metal surfaces, removes oil and grease. This solvent is effective on ball bearings, precision mechanical parts, engine parts, steel moulds etc. This product is suitable for use in degreasing fountains or sprays.
SCALP AQUA 1000 is a concentrated, water-based degreaser and detergent cleansing solution. This product has been designed for the cleaning and degreasing of all synthetic surfaces encountered in the building such as facade cladding, PVC, painted surfaces (painter's laundry), aluminum, zinc, brass, galva, stainless steel, plastic sheeting.
It is perfect for daily cleaning of mineral surfaces such as tiles, stoneware, marble, etc. and can be used in industrial detergency (auto washers etc.) for mechanical parts, engine generators etc.
The PASSIVAL 110 L is a product specially designed for the degreasing, passivation and inter-operation protection of steel parts and cast irons. The PASSIVAL 110 L is used in immersion, by spraying or with a high pressure machine.
HYPRACOAT F309 is an amorphous phosphating process for the treatment of metal parts. It is applied to steel using a high pressure device. The treatment gives the substrate properties that promote the adhesion of organic finishes (paints and varnishes). In addition to its very good adhesion properties, the conversion layer developed on the substrate provides good corrosion protection.
EN 
FR 
ES 
DE 
PL 
NL 
