SCALPEX A1 is a hot, immersion, engine paint-stripper and descaler for steel and cast-iron. This hot-bath stripper is used for descaling and stripping paints, as well as removing metal oxide on steel and cast iron. This immersion, degreasing descaler and stripper, does not harm heat-resistant steels and cast iron. SCALPEX A1, immersion stripper, attacks aluminium, copper and zinc alloys.
SCALPEX A1 is used for degreasing and descaling combustion deposits and deoxidising combustion-engine steel and cast-iron parts. It is also an excellent hot-bath, immersion paint stripper.
SCALPEX A1 contains biodegradable surfactants coupled with stripping and deoxidising accelerators.
Step 1
SCALPEX A1 must be 50% diluted with water.
Step 2
Fill the bath with product.
Step 3
Soak the parts to be stripped in the bath.
Step 4
Leave the parts in the bath until all coats of paint have been completely stripped.
Step 5
Take out the parts and rinse with water.
Warning ! SCALPEX A1 attacks aluminium, copper and zinc alloys.
SCALPEX A1 is a paint remover and engine descaler specially developed for the hot treatment of steel and cast iron. Thanks to its powerful formulation, this hot bath stripper offers excellent performance in descaling, paint stripping and removal of metal oxides from steel and cast iron.
Cleaning and preparing metal surfaces with SCALPEX A1 gives exceptional results. This immersion paint stripper provides an effective and fast effect, ensuring complete and complete removal of unwanted coatings. In addition, it effectively removes metal oxide deposits, leaving a clean surface for further processing. It is important to note that SCALPEX A1 has no effect on refractory steels or cast iron and therefore provides additional protection for these specific materials. Be aware, however, that this stripper can attack aluminum, copper and zinc alloys. Therefore, we recommend that you take the necessary precautions and check the suitability of the materials before use.
Using the SCALPEX A1 is simple and convenient. Simply immerse the parts to be treated in a hot bath containing the paint stripper while respecting the temperatures and times recommended. Meanwhile, SCALPEX A1 acts in depth, dissolving colors and eliminating metal oxides for optimal results.
Always follow the instructions for use, wear appropriate personal protective equipment and handle the product in a well-ventilated area.
Choose SCALPEX A1 for efficient and reliable pickling and descaling of metal paints and oxides on steel and cast iron. Thanks to its particular formulation and its action in a hot bath, this immersion paint stripper achieves excellent results while ensuring the protection of the materials concerned.
HYPRASTRIP B 604 is an immersion paint stripper for ferrous metals. This alkaline stripper is used as a hot-bath immersion. It must not be used on light alloys made of aluminium, zinc and copper, as this is a highly-alkaline immersion stripper. It is specifically recommended for difficult cases where thick or very resistant paints must be stripped.
DECAPEINT is a wood and metal immersion stripper for unbaked paints. This hot-bath stripper has a so-called “destructive” formula, composed of sodium hydroxide, alkaline salts and surfactants. It strips paints (glycerophtalic, vinyl and acrylic paint, primers) from wood and ferrous-metal substrates. This immersion stripper for unbaked paints must be diluted with water and used as a bath heated at between 20 and 40 °C.
SCALPIK L 400 is a hot-bath, immersion, liquid stripper. It removes epoxy, polyester, acrylic, vinyl and E-coat paints, certain varnishes, as well as all unbaked paints found on ferrous and non-ferrous metals. This innovative product is chlorinated-solvent-free and is the ideal substitute for methylene-chloride-based liquid strippers.
SCALPIK DP 283 NG is a hot-bath paint stripper for all substrates. It is composed of biodegradable, low-volatility solvents. This hot-bath stripper for all substrates works on a large number of paints (epoxy, epoxy-polyester, polyester, glycerophtalic, electrophoretic silicone, vinyl, acrylic paint etc.). This immersion stripper dissolves the resins and disperses the pigments found in paint. The film of paint that has been broken down by SCALPIK DP 283 NG is removed by rinsing with pressurised water. This composition does not attack such supports as steel and aluminium.
To download the data sheet, please enter your e-mail address to access the document.
EN 
FR 
ES 
DE 
PL 
NL 
