Hot-bath immersion stripper

SCALPIK L 400

Hot-bath immersion stripper

SCALPIK L 400 is a hot-bath, immersion, liquid stripper. It removes epoxy, polyester, acrylic, vinyl and E-coat paints, certain varnishes, as well as all unbaked paints found on ferrous and non-ferrous metals. This innovative product is chlorinated-solvent-free and is the ideal substitute for methylene-chloride-based liquid strippers.

Heat stripping

Complementary products

More products in this range

Heat stripping
Hot, immersion alkaline stripper

HYPRASTRIP B 604 is an immersion paint stripper for ferrous metals. This alkaline stripper is used as a hot-bath immersion. It must not be used on light alloys made of aluminium, zinc and copper, as this is a highly-alkaline immersion stripper. It is specifically recommended for difficult cases where thick or very resistant paints must be stripped.

Heat stripping
Immersion degreaser and stripper

SCALPEX A1 is a hot, immersion, engine paint-stripper and descaler for steel and cast-iron. This hot-bath stripper is used for descaling and stripping paints, as well as removing metal oxide on steel and cast iron. This immersion, degreasing descaler and stripper, does not harm heat-resistant steels and cast iron. SCALPEX A1, immersion stripper, attacks aluminium, copper and zinc alloys.

Heat stripping
Immersion stripper for unbaked paints

DECAPEINT is a wood and metal immersion stripper for unbaked paints. This hot-bath stripper has a so-called “destructive” formula, composed of sodium hydroxide, alkaline salts and surfactants. It strips paints (glycerophtalic, vinyl and acrylic paint, primers) from wood and ferrous-metal substrates. This immersion stripper for unbaked paints must be diluted with water and used as a bath heated at between 20 and 40 °C.

 

Heat stripping
Hot-bath stripper for all substrates

SCALPIK DP 283 NG is a hot-bath paint stripper for all substrates. It is composed of biodegradable, low-volatility solvents. This hot-bath stripper for all substrates works on a large number of paints (epoxy, epoxy-polyester, polyester, glycerophtalic, electrophoretic silicone, vinyl, acrylic paint etc.). This immersion stripper dissolves the resins and disperses the pigments found in paint. The film of paint that has been broken down by SCALPIK DP 283 NG is removed by rinsing with pressurised water. This composition does not attack such supports as steel and aluminium.

en_US

Rechercher sur le site

Technical Data Sheet

To download the data sheet, please enter your e-mail address to access the document.