SCALP DMC 74 LIQUIDE is an alkaline stripping solution for wood and metals. This immersion stripper is designed for cleaning and stripping wood and metals. This product is ready to use but may be diluted to a 50% concentration in certain cases. This alkaline stripper for wood and metals is used as a bath, in stainless-steel and composite-material tanks suited to basic solutions. SCALP DMC 74 LIQUID can also be used as an additive with a high-pressure washer.
SCALP DMC 74 LIQUIDE is an alkaline stripper designed for cleaning and stripping wood and metals. It is used as a bath but can also be used with a high-pressure washer as an additive.
Easy to use: simply pour the alkaline product in the bath and add water if necessary. The parts to be stripped must then be immersed in the stripping bath. The time it takes to work ranges from a few minutes to several hours, based on the thickness and type of coating.
Step 1
Product is ready to use (product may be diluted to a 50 % concentration in certain cases).
Step 2
Pour product into the tank and in need, add water.
Step 3
Immerse the parts to be stripped in the bath.
Step 4
Leave them as long as required until every coat of paint has been completely stripped away.
Step 5
Take out the stripped parts and rinse with pressurised water.
Step 6
Allow to dry .
SCALP DMC 74 LIQUIDE is a highly alkaline stripping solution specially developed for cleaning and stripping wood and metal. This dip stripper offers an effective and practical solution for finishing wood and metal surfaces.
Ready-to-use SCALP DMC 74 LIQUIDE can be diluted up to 50%, giving you the flexibility to use it as required.
This highly alkaline wood and metal stripper is designed for use by immersion in stainless steel tanks and other composite materials suitable for alkaline solutions. It works thoroughly and effectively to remove unwanted coatings, residues and contamination. SCALP DMC 74 LIQUIDE can also be used as an additive in high-pressure cleaners, offering a versatile solution for surface cleaning.
SCALP DMC 74 LIQUIDE offers professional quality and is the ideal choice for industrial companies and DIY enthusiasts alike. The alkaline formulation ensures excellent results while preserving the integrity of the treated material.
Trust SCALP DMC 74 LIQUIDE for your wood and metal cleaning and stripping needs. This high-quality alkaline paint stripper will give you a clean surface free of unwanted coatings and restore your materials to their original lustre.
SCALPIK L 300 is free of methylene chloride, and designed to remove all types of paints (powder coatings, epoxy and polyester paints etc.), as well as varnishes, from various surfaces (steel, aluminium etc.). This product is specifically recommended for the stripping of successive layers of incorrect paint.
SCALPIK L16NG is a cold, liquid stripper for use in stripping baths. It is ideal for stripping varnished paints and paints from wood.
This innovative product is free of chlorinated solvent and is a perfect replacement for liquid methylene chloride paint pickling supports.
SCALPIK L 20 NG is a cold-bath, immersion, ultra-fast-acting, liquid, paint stripper. This cold-bath, immersion stripper works the fastest in its class. It is an optimised blend WITHOUT DICHLOROMETHANE, ideal for ferrous and non-ferrous METALS as well as WOOD. SCALPIK L 20 NG has a very good biting power. This innovative paint pickling solution removes paints such as epoxy polyester, acrylics, vinyl, paints from cataphoresis, some varnishes and all uncured paints on ferrous metals and aluminium.
SCALPIK L12S is an additive-containing liquid stripper, for cold-bath stripping of paints and varnishes that are most commonly used in the construction and industrial sectors. It acts by penetrating the different paint layers and peeling off the paint layers from the paint support.
The product does not saturate. It is enough to recover the paint waste lying at the bottom of the tank and to adjust the level.
STRIPAC NI BASE ECO is a dip stripper, specifically for decoating aluminium. Thanks to its concentrated formula, this stripper effectively removes post-soldering oxides, as well as impurities, from aluminium. It preserves the corrosion-resistance of treated materials.
STRIPAC BASE ECO is an immersion stripper for paint coatings on metals, wood and aluminium. This cold-bath stripper is used together with STRIPAC ADDITIVE. The combination of the two products (base + additive) must be used at ambient temperature and works on a large number of paints (epoxy-polyester, glycerophtalic, vinyl and acrylic paint, stains, varnishes, primers etc.).
STRIPAC BASE ECO works by dissolving the resins and denaturing the mineral pigments found in paint.
STRIPAN MO2 ECO is a dip, acid stripper for all liquid and powder paints on steel and aluminium substrates. STRIPAN MO2 ECO contains a combination of organic acids giving it very active pickling properties: pickling of ferrous materials coated with glycerophthalic, polyurethane, pure epoxy, epoxy polyester, tie bases.
SCALPIK L13S is a chlorine-based liquid stripper for the cold-bath stripping of paints and varnishes. This cold-bath stripper works by penetrating the different coats of paint and lifting them. This liquid stripper is suitable for all sectors. It enables the stripping of parts made of wood, metal, steel, aluminium etc.
SCALP L13S, immersion liquid stripper, is effective on all types of substrates, even in those hardest-to-reach places.
To download the data sheet, please enter your e-mail address to access the document.
EN 
FR 
ES 
DE 
PL 
NL 
