The PASSIVAL 110 L is a product specially designed for the degreasing, passivation and inter-operation protection of steel parts and cast irons. The PASSIVAL 110 L is used in immersion, by spraying or with a high pressure machine.
PASSIVAL 110L is a product that has been specifically designed for the temporary degreasing, passivation and protection of steel and cast-iron parts. It can be used by immersion, spray or in a high-pressure machine.
Used by immersion, this steel and cast-iron passivator and degreaser must be 5-20% diluted with water.
Used as a spray, PASSIVAL 110L must be 5-20% diluted.
For use on cast-iron, a concentration of 1-5% is recommended.
Immersion use :
Spray use :
NST PRO 61 is a degreasing cleaner. It removes oil and grease from mechanical parts and metal surfaces (bearings and balls, precision mechanics, engine parts, steel mold ...). NST PRO 61 is formulated from oxygenated and chlorinated solvents.
NST 50 is a cleaner and degreaser, formulated with oxygenated solvents and hydrocarbons. This super degreaser for mechanical parts and metal surfaces, removes oil and grease. This solvent is effective on ball bearings, precision mechanical parts, engine parts, steel moulds etc. This product is suitable for use in degreasing fountains or sprays.
SCALP AQUA 1000 is a concentrated, water-based degreaser and detergent cleansing solution. This product has been designed for the cleaning and degreasing of all synthetic surfaces encountered in the building such as facade cladding, PVC, painted surfaces (painter's laundry), aluminum, zinc, brass, galva, stainless steel, plastic sheeting.
It is perfect for daily cleaning of mineral surfaces such as tiles, stoneware, marble, etc. and can be used in industrial detergency (auto washers etc.) for mechanical parts, engine generators etc.
The SCALPNET 60 is used for cleaning road vehicles, degreasing, cleaning traffic lanes, eliminates the static film of vehicles. It is also used with a high pressure machine for cleaning and degreasing all surfaces.
The SCALPNET 60 is very effective at removing insects adhering to the car bodywork. In addition, it has a self-drying effect. The SCALPNET 60 gives plastics their original brilliance.
HYPRACOAT F309 is an amorphous phosphating process for the treatment of metal parts. It is applied to steel using a high pressure device. The treatment gives the substrate properties that promote the adhesion of organic finishes (paints and varnishes). In addition to its very good adhesion properties, the conversion layer developed on the substrate provides good corrosion protection.
EN 
FR 
ES 
DE 
PL 
NL 
